Finger jointing line OBLES FJS-VSA-1060
Year of manufacture 1995
Length of the input working pieces: Min 200mm, Max 1000mm
Width of the input working pieces: Min 32mm, Max 160mm
Thickness of the input working pieces: Min 18mm, Max 80mm
Length of output pieces: Up to ~ 4.5 mtr
The machine has a cutter, so the pieces are returned and used in the longitudinal direction.
This is done automatically while the operator places the next table with the pieces to be joined.
This feature we have built up (see the extra in feed table, marked on the attached drawing) extra on the machine.
Notice: This year the owner has renovated the mill shaft
Spare parts and tools: a reserve hydraulic motor .
Various frameworks and tools are available.
Dimensions of the working pieces:
First Width work piece. Min 32mm, Max 160mm (the Swedish owners checked again the max level but went away from the 160mm that can be increased only by modifying the machine
Second Work piece height: Min 18mm, Max 80mm
Third Length of work piece: 200mm Min, Max 1000mm
As final length of the work pieces made finger-jointed:
Approx. 4.5 m in length
A machine demonstration in Sweden is possible.